Processor Tensiometer K100MK2
Print Version Features Application Technical Data Info-Booklet
 | |
| | |
 |
The Multi-Talent
The K100MK2 is the universal instrument among tensiometers. The measuring processes have been optimized and made more exact by a high degree of automation and the latest technical analysis standards.
The measuring accuracy of the K100MK2 can be additionally increased by the use of the built-in ionizer.
The high accuracy of the results and the flexible software control make the K100MK2 the top-class tensiometer.
When conventional tensiometers are used to make sensitive measurements on small samples, single fibres or insulating plastics electrostatic forces of attraction occur between the solid and the liquid surface - the measured force or the detected surface height is incorrect.
KRÜSS has thought out a solution to this problem (and also applied for a patent for it): the use of an ionizer. This ionizes the air in the sample chamber for a short time and in this manner eliminates any electrostatic charges. The measurement can now be made without any interference with the highest degree of accuracy.
 | Surface and interfacial tension measurement of liquids | |
| Dynamic contact angle measurements | |
| Extended CMC - Critical Micelle Concentration - determination with new innovative double dosing system |  |
| Surface energy calculations on solids, powders, pigments, fibres, etc. | |
| Measuring the density of liquids | |
| Sedimentation and sediment resistance measurements | |
| Built-in ionizer for eliminating electrostatic charges | |
| Controlled by LabDesk™ software | |
| Doors made of high-grade glass and covering of sample chamber made of brushed stainless steel for maximum chemical and thermical resistance. | |
| Surface-active agent development |
| Wetting properties of tablets, pharmaceutical active ingredients and auxiliary products as well as pigments |
| Monitoring surface optimization in the production of polymers and foils |
| Lacquers, dyes, inks |
Du Noüy Ring method
Dynamic Wilhelmy method
Single Fiber Wilhelmy method
Wilhelmy Plate method
Powder Contact Angle method
Lenard Frame method
Ring tear-off
Rod method
Sorption
Wetted length
Critical micelle concentration (CMC)
Sedimentation
Penetration
Determination of liquid density
| SFT/IFT | |||||||||||||||||||||||||
| Range | 1 - 1000 mN/m | |||||||||||||||||||||||||
| Resolution | 0.001 mN/m | |||||||||||||||||||||||||
| Position | |||||||||||||||||||||||||
| Range | > 110 mm | |||||||||||||||||||||||||
| Resolution | 0.1 µm | |||||||||||||||||||||||||
| Speed | 0.099... 500 mm/min | |||||||||||||||||||||||||
| Weight Measurement | |||||||||||||||||||||||||
| Range | 210g | |||||||||||||||||||||||||
| Resolution | 10 µg | |||||||||||||||||||||||||
| Data Rate | ∼ 50 Hz | |||||||||||||||||||||||||
| Calibration/Adjustment | automatic | |||||||||||||||||||||||||
| Temperature Control | |||||||||||||||||||||||||
| Range | -10 - 130°C | |||||||||||||||||||||||||
| Temperature | |||||||||||||||||||||||||
| Range | -60... 450°C | |||||||||||||||||||||||||
| Resolution | 0.01°C | |||||||||||||||||||||||||
| Probes | 2 | |||||||||||||||||||||||||
| Sample Vessel | 50 mm, 70 mm, 100 mm inverse CMC | ||||||||||||||||||||||||
| Housing | |||||||||||||||||||||||||
| Size (L x W x H) | 390 x 300 x 585 mm | |||||||||||||||||||||||||
| Weight | 24 kg | |||||||||||||||||||||||||
| Interface | |||||||||||||||||||||||||
| PC | RS232 (USB optional) | |||||||||||||||||||||||||
| Auxiliary Ports | 2 x RS232 | |||||||||||||||||||||||||
| Ionizer | |||||||||||||||||||||||||
| Accessories | ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| See also: K100SF | ||||||||||||||||||||||||||
| Info-Booklet K100MK2 | ||||||||||||||||||||||||||
 Download Info-Booklet | ||||||||||||||||||||||||||
